Author Archives: Tn-tech Admin

DC Power Supplies

PMX-A Series

Posted on by Tn-tech Admin

Compact DC Power Supply (CV/CC) : 9 Models

KIKUSUI PMX-A Sries

KIKUSUI PMX-A Sries

KIKUSUI PMX-A Sries

KIKUSUI PMX-A Sries

Outline

The PMX-A series is a compact, high-performance DC power supply that provides constant voltage (CV) and constant current (CC). It is designed to improve working efficiency for benchtop uses. For this purpose, the output terminals are located on the front panel and are ergonomically designed so that wiring harnesses for electrical loads can be connected by moving your fingers naturally. Moreover, a forced air cooling system is used to intake and exhaust of the internal air, so the unit can be rack mounted without space.
Furthermore, the PMX-A is equipped with LAN, USB, and RS232C interfaces as standard interfaces required for system operation. In particular, the LAN interface enables you to control and monitor the power supply from Web browsers on PCs, smartphones, tablets, and other terminal devices. Moreover, the PMX-A is LXI（LAN eXtention for Instrumentation) certified product, so it can be connected easier with your measurement system using LAN interface.
The PMX-A is also equipped with remote sensing (for 18V, 35V models only), analog external control/monitoring output, various protective functions, memory function, and other functions.

 Features

A standard feature of the networking capability provides extended applications of the ordinary testing.

  • Series regulator system with excellent noise performance
  • High setting resolution – Voltage: 1 mV, Current: 0.1 mA (PMX18-2A)
  • Wide range of output variations (9 models are available)
  • LAN (LXI compliant) / USB / RS232C as standard interface
  • External analog remote control
  • Monitoring and status signal output
  • CV, CC priority start function (to prevent overshoot when the output is ON)
  • Remote sensing function (18V, 35V models)
  • Key lock, 3-point preset memory function

Easy access with the built-in web server
Use a browser from a PC, smartphone, or tablet to access the web server built into the PMX-A series for convenient control and monitoring.
* Connecting with a smartphone, tablet, etc. requires a Wi-Fi environment (wireless LAN router etc.).

Application Software
Sequence Creation Software
SD025-PMX（Wavy for PMX） 
The software that supports to the auto testing of the power supply. Allows you to create and edit sequence data easily using a mouse !

The SD025-PMX (Wavy for PMX) is an application software that supports sequence creation and the operation of the Kikusui power supplie and the electronic load. The “Wavy” software allows you to create and edit sequences visually using a mouse without programming knowledge. It enables you to control the power supply in much the same way as remote controller for such monitoring the voltage and current, logging and so on.

Free downloads of “Wavy” sequence creation software
(Limited function edition *)
The limited function of the optional sequence creation and control software “SD025-PMX (Wavy for PMX)” is available to be downloaded free of charge. For details, please refer to the following information and our WEB.
* The number of steps is limited up to 5 steps.

 Lineup

Model Specification
PMX18-2A  Manual…0 to 18V/0 to 2A LAN/USB/RS232C as standard interface (LAN: LXI compliant)
PMX18-5A  Manual…0 to 18V/0 to 5A LAN/USB/RS232C as standard interface (LAN: LXI compliant)
PMX35-1A  Manual…0 to 35V/0 to 1A LAN/USB/RS232C as standard interface (LAN: LXI compliant)
PMX35-3A  Manual…0 to 35V/0 to 3A LAN/USB/RS232C as standard interface (LAN: LXI compliant)
PMX70-1A  Manual…0 to 70V/0 to 1A LAN/USB/RS232C as standard interface (LAN: LXI compliant)
PMX110-0.6A  Manual…0 to 110V/0 to 0.6A LAN/USB/RS232C as standard interface (LAN: LXI compliant)
PMX250-0.25A  Manual…0 to 250V/0 to 0.25A LAN/USB/RS232C as standard interface (LAN: LXI compliant)
PMX350-0.2A  Manual…0 to 350V/0 to 0.2A LAN/USB/RS232C as standard interface (LAN: LXI compliant)
PMX500-0.1A  Manual…0 to 500V/0 to 0.1A LAN/USB/RS232C as standard interface (LAN: LXI compliant)
Electronic Loads

PCZ1000A

Posted on by Tn-tech Admin

AC Electronic Load (CC/CR/CP)

Outline

PCZ1000A is an AC electronic load that enables you to perform load simulation for various inverters and transformers. In addition to the resistive loads generally used in tests, it is capable of simulating capacitor-input rectifier loads.
The instrument supports input up to 1000W and is equipped with 3 operation modes – Constant Current, Constant Resistance, and Constant Power.Current waveform resemble to sine wave can be output constantly without effect by voltage waveform at each mode. Moreover, the instrument is equipped with Crest Factor function that is suitable for simulating current load test for switching power supply.
This instrument provides improved operation through CPU control and enables external control and read-back via RS-232C.

Features

  • Maximum input load power: 1000W
  • Input voltage range: 14V to 280V(rms)
  • Input current range: 0 to 10A(rms)
  • Input frequency range: 45 to 65Hz
  • Parallel operation expands the load capacity
    Up to 5 units can be operated in parallel (Max. 5kW, 50Arms)
  • Supports single-phase 3-wire method, 3-phase 3-wire method
    Equipped with tracking operation function
  • Crest Factor Function [1.4 to 4.0] Facilitating load tests for peak or harmonic currents helps reduce design and labor time and cost as well as improve the quality of the unit under test

Lineup

Model Specification
PCZ1000A AC Electronic Load (E-Load), Maximum input load power:1000W, Input voltage range: 14V to 280V(rms), Input current range: 0 to 10A(rms), Input frequency range: 45 to 65Hz
Electronic Loads

PLZ-U Series

Posted on by Tn-tech Admin

Modular Multifunction DC Electronic Load (CC/CV/CR/Zero volt input) : 4 Models

Outline

The current trend in semiconductors is towards lower voltages and higher speeds. This trend places similar demands on both the components of semiconductor power units, such as switching power supplies, batteries and DC/DC converters, and also on the electronic loads used for testing. Also, a growing number of users with a need for multiple-output power units and easy channel reconfiguration are calling for plug-in type electronic loads that can be easily configured to support multiple channels. The advent of an electronic load system that satisfies all these needs has been long awaited. It was against this background that we developed the PLZ-U Series of electronic loads.
The PLZ-U Series of compact and high-performance modular electronic loads is capable of operating in five modes: constant current, constant resistance, constant voltage, constant current + constant voltage, and constant resistance + constant voltage. The load system consists of load modules and a frame. The load modules are inserted into the frame that also serves as a control unit. The PLZ-30F frame can accommodate up to three load modules, while the PLZ-50F frame can accommodate up to five. The load modules can be operated in parallel, so that the current capacity or power capacity can be changed easily, from 75 to 750 watts*1, as needed for the device under test. In addition to offering high-speed response at a maximum slew rate of 2.4 A/ µs*2 and a minimum setting resolution of 10 µ A*3, the system features a variety of functions including soft start, variable slew rate, a switching function, ABC preset memory function, four setup memories, and a sequence function. What’s more, timer functions combined with time/voltage measurement functions allow you to measure battery discharge characteristics.
For communication, the system is provided with GPIB and RS-232C interfaces as standard. Both interfaces support IEEE 488.2 as well as the Standard Commands for Programmable Instruments (SCPI) commands, developed for testing and measuring instruments.

*1 When five PLZ150U units are installed in a PLZ-50F frame
*2 For the PLZ150U
*3 For the PLZ70UA

Features

  • Compact, lightweight body
    The electronic load system is as wide as a 19-inch rack with a height of 3U. Weighing about 11 kg when configured for three channels or about 17 kg when configured for five channels, the system is compact, lightweight and space-saving.
  • High-speed response
    In constant current mode, the electronic load is capable of offering high-speed response at a slew rate of 2.4 A/µ s at the rising and falling edges of the current (equivalent to about 10 µ s when converted to the rise and fall times; in the case of PLZ150U).
  • High precision and high resolution
    The built-in three-range configuration provides both wide dynamic range and high precision. The voltmeter, ammeter and wattmeter functions that display values using up to five digits each and a minimum setting resolution of either 10 µA (PLZ70UA) or 20 µA (PLZ150U) are implemented.
  • Variable slew rate
    In constant current or constant resistance mode, the slew rate can be changed continuously.
  • 0(Zero)V input
    The PLZ70UA model operates even when the input operating voltage is 0(Zero)V.
  • Multi-channel system
    PLZ-50F may be configured with up to five channels, and PLZ-30F may be configured with up to three channels. Isolated from each other, the channels can operate both independently and in synchronization. Different models of load units (PLZ150U and PLZ70UA) can be housed in a single frame.
  • Frame control
    You can connect two or more frames and use one of them to control the others (up to five frames can be connected at a time). This enables you to turn on or off the load and call preset values.
  • Parallel operation for increased capacity
    Up to five load modules may be operated in parallel, provided that adjacent load modules are of the same model.
  • Sequence function to enable load simulations
  • External control functions

Lineup

Model Specification
PLZ70UA DC Electronic Load (E-Load), 0 to 150V, 15A, 75W, Modular Electronic Load, Rise time: 10 µ s (which converts to rise and fall times) high-speed response, *Note: The control frame (model PLZ-30F or model PLZ-50F) is necessary to operate
PLZ150U DC Electronic Load (E-Load), 1.5 to 150V, 30A, 150W, Modular Electronic Load, Rise time: 10 µs (which converts to rise and fall times) high-speed response, *Note: The control frame (model PLZ-30F or model PLZ-50F) is necessary to operate
PLZ-30F The control frame for PLZ-U series electronic Load (E-Load), Capable of contain up to three load modules, Two blank panels attached
PLZ-50F The control frame for PLZ-U series electronic Load (E-Load), Capable of contain up to five load modules, Four blank panels attached

Electronic Loads

PLZ6000R

Posted on by Tn-tech Admin

6kW Regenerative DC Electronic Load (CC/CR/CV/CP/CC+CV/CR+CV)

Outline

PLZ6000R is a DC electronic load that regenerates load power to the AC line. Regular electronic loads consume load power by having semiconductor devices convert it into heat. By contrast, PLZ6000R converts load power into reusable electric power, rather than converting it into heat as is typically done, and feeds this power to the AC line, thereby substantially reducing the amount of waste energy. PLZ6000R is an environment-friendly electronic load that can contribute significantly to your energy saving efforts.

Features

  • Power regeneration efficiency of up to 90% (at rated power)
    The use of a proprietary switching technology (patent pending) provides high power regeneration efficiency – from 85% or more at one-third of rated power (2000 W) to a maximum of 90% or more. This energy saving feature greatly reduces the electronic load’s environment impact on your plant and it is not necessary to equip special cooling system such as water cooling method to supress the heat generation.
  • No necessity of special cooling system such as water cooling method
    Please view the movie about comparison with conventional E-load. The movie will help your understanding about effect of PLZ6000R.
    • Aging and evaluation testing for DC/DC converters and various types of power supplies
    • Evaluation and durability testing for alternators and motor generators
    • Discharge testing for different types of batteries (lead, lithium, and assembled batteries)
    • Dummy load testing for equipment powered by natural energy (solar cells and wind power generation)
    • Evaluation testing for fuel cells and stacks
    [Note] This product is intended for in-plant power generation only. (It does not feed its generated power back to the electric power system.) This product cannot be used unless 5.4 kW or more of power is consumed by each power distribution system per one unit.

    Lineup

    Model Specification
    PLZ6000R Regenerative DC Electronic Load (E-Load), Voltage/current/power range:30 V – 400 A / 60 V – 200 A / 6 kW, Power regeneration efficiency of up to 90% or more!, Six load modes (CC/CR/CV/CP/CC+CV/CR+CV), Easy-to-use design featuring a large-size LCD panel, Equipped with major interfaces (GPIB, RS-232C, and USB) as standard
Electronic Loads

PLZ-4WH Series

Posted on by Tn-tech Admin

Multifunctional High Voltage DC Electronic Load (CC/CV/CR/CP) : 4 Models

Outline

The PLZ-4WH Series Electronic Load is a multifunctional system designed to offer the highest levels of reliability and safety. The electronic load contains a stable and high performance current-control circuit that enables high-speed load simulations with maximum operating voltage of 650V. In addition, its CPU control feature works to improve operability and multifunctional capability. The high-precision current settings provide you with sufficient resolution. The PLZ4WH comes standard with GPIB, RS232C, and USB communication functions, that can be easily incorporated into a wide range of test and inspection systems.

Features

  • Extended operating range !
  • Expandable system up to 9 kW / 450A by connecting booster units (exclusively used for Model PLZ1004WH)
  • 3 ranges of setting resolution equipped with L range (1/100)
  • Voltage Monitor terminal for monitoring high-voltage
  • In addition to CC, CR mode 5 levels of response setting for CV mode
  • Sequence function
    Capable of program up to 1024 steps
  • Optional software Wavy makes your operation easier
    The application software supporting the sequence operation (option)
  • Other features
    -Over-Voltage Protection (OVP)
    -Over-Current Protection (OCP)
    -Over-Power Protection (OPP)
    -Over-Heat Protection (OHP)
    -Under-Voltage Protection (UVP)
    -Reverse Connection Protection (REV)
    -Adjustable Slew Rate
    -Switching Operation
    -Soft Start function
    -Elapsed Time Display
    -Auto load-off timer
    -Remote sensing
    -External load on/off control input
    -External range switching input
    -External trigger input
    -External alarm input
    -Alarm status output
    -Load-on status output
    -Range status output
    -Short signal
    -External voltage control (CC,CR,CV,CP mode)
    -External resistance control (CC,CR,CV,CP mode)
    -Current monitor output
    -Voltage monitor output

The Large scale system can be achieved at low cost and saving space.(Booster unit model PLZ2004WHB)

To achieve the large scale test system at low cost, the booster unit Model PLZ2004WHB is available to combine with Model PLZ1004WH*. The configuration of the system consists of Model PLZ1004WH as a master unit and up to 4units of the booster unit (PLZ2004WHB) as slave units connected in parallel operation. (Max. 9kW, 450A)

[Specifications]

  • Operating Voltage: 5V to 650V
  • Current: 100A
  • Power: 2000W
  • Input Voltage: AC100V to 240V (AC90V to 250V) single phase, continuous
  • Power Consumption: 200VA(max)
  • Dimensions: 430W×173（190）H×550（590）Dmm
  • Weight: approx.24kg

*Exclusively used for Model PLZ1004WH. It can not be used to connect any other model.

Large-Capacity DC Electronic Load System

The PLZ-4WH SR/LP Series offers wide range of the “Large-Capacity DC Electronic Load System” that consists of the conventional electronic load model PLZ1004WH and PLZ2004WHB applying to the high voltage (maximum 650 V) installed in the exclusive rack mount system.
*Refer to data sheet(pdf) for details

Lineup

Model Specification
PLZ164WH DC Electronic Load (E-Load), 5 to 650V, 8.25A, 165W , Possible to perform actual Load simulation by sequence control function, Equipped with RS-232C, GPIB, USB (Supplied as standard)
PLZ334WH DC Electronic Load (E-Load), 5 to 650V, 16.5A, 330W , Possible to perform actual Load simulation by sequence control function, Equipped with RS-232C, GPIB, USB (Supplied as standard)
PLZ1004WH DC Electronic Load (E-Load), 5 to 650V, 50A, 1000W , Possible to perform actual Load simulation by sequence control function, Equipped with RS-232C, GPIB, USB (Supplied as standard)
PLZ2004WHB 2000W booster unit for model PLZ1004WH dc electronic load (E-Load). Using 1 PLZ1004WH as a master unit, a maximum of 4 booster units can be parallel connected. (Max. 9kW, 450A) *PLZ2004WHB can be used for the PLZ1004WH only. It cannot be connected and used with any other model.
Electronic Loads

PLZ-4WL Series

Posted on by Tn-tech Admin

High Speed-Large Current DC Electronic Load (CC/CV/CR/CP) : 2 Models

Outline

While the PLZ-4WL series succeeds to the superior operability of our conventional model of the PLZ-4W series, the PLZ-4WL series realizes the high speed rise and fall time (slew rate of 50A/µs.) in the range of low voltage with large current.
The PLZ-4WL offers six operation modes, and equips with various features such as sequence operation, switching operation, soft-start function, and time and voltage measurement.
The PLZ-4WL applies not only for the conventional load test of the CPU power supply, but also it can be applied to even faster current response test. In addition, the PLZ-4WL is a space-saving design (about 50% less volume of the conventional model) that can save the facility space of the testing site, and it can be applied for the single cell testing of the large scale rechargeable battery.

Features

  • Applications
    – Test for the Low Voltage Power Supply of the CPU
    – Discharge test for the large current rechargeable battery
    – IV characteristic test of the solar battery
    – Impedance test for the various type of rechargeable batteries, power supplies
    – Test for the relays, switches
    – Absorbing the surge of brushless motor
    – Test for the prearcing time-current characteristic
  • Realizing the low voltage operation
    Possible to operate as low as 50mV by the input voltage. Even below the input voltage of 0.3V, this product can be used by reducing the current.
  • Accurate low-rate discharge by the Low-range (1/100)
    Each operation mode of the CC, CR, and CP has 3 ranges (H, M, L). The “L “range employs the scale of 1/100 which covers the range from the small to the large scale of the current.
  • Fast Slew rate
    Realize the slew rate of 50A/µs at 2.3V of the load input terminal voltage
  • Convenient feature for the discharge testing
    The Auto load-off timer and the Cut-off features can be applied to the discharge capacitance measurement of the rechargeable battery
  • Operation mode
    Applied to the 6 operating modes (Constant Current, Constant Resistance, Constant Voltage, Constant Power, Constant Current + Constant Voltage, Constant Resistance + Constant Voltage)
  • Sequence function
    The sequence mode can be set in 2 operation modes (Normal and Fast mode). The Fast mode can be set for the minimum step time of 25µs, and it can be synchronized with the external device by using the trigger input/output feature.
  • External analog control
    Not only the external control for the CC, CR, CP, and CV, but also it is capable to superimpose the current by the external input current on the present value of the CC setting. Moreover, it also can turn the LOAD ON/OFF.
  • Protection features
    To ensure the safety, it equips the various protection features and activation of the alarm function. The alarm function can be output to the external source as an alarm output. The fuse is used to cut-off the output for the protection feature of the reverse connection.
  • Other features
    -Switching operation
    -Set-up memories (100)
    -CC soft-start
    -Slew rate setting (CC)
    -Response setting (2 levels for each CV and CR)
    -Current monitor output
    -Remote sensing
    …and more.

Lineup

Model Specification
PLZ164WL DC Electronic Load (E-Load), 0.3 to 30V, 50A, 160W , Rise time: 2 µ s (which converts to rise and fall times) high-speed response, Possible to perform actual Load simulation by sequence control function, Equipped with USB (Supplied as standard)
PLZ334WL DC Electronic Load (E-Load), 0.3 to 30V, 100A, 330W , Rise time: 2 µ s (which converts to rise and fall times) high-speed response, Possible to perform actual Load simulation by sequence control function, Equipped with USB (Supplied as standard)
Electronic Loads

PLZ-4W Series

Posted on by Tn-tech Admin

Multifunctional DC Electronic Load (CC/CV/CR/CP/Zero volt input) : 6 Models

Outline

The PLZ-4W Series Electronic Load unit is a multifunctional system designed to offer the highest levels of reliability and safety with operation function of constant voltage, constant current, constant power and constant resistance mode. And its control unit comes with GPIB, RS232C and USB as standard equipment, available in 5 models.
A 0(Zero)V input operating voltage is available in 2 models (PLZ164WA, PLZ664WA) which are suitable to meet the testing demands for the Fuel Cell, DC/DC converter, SW Power Supply, and any other devices required for the lower operating voltage application. Model PLZ664WA offers the 132A at 0V input as a largest current rating in its class. ( 33A for model PLZ164WA)
Furthermore, the PLZ-4W features high speed slew rate when switching, it can be used as simulating load for the characteristic, performance, life cycle, aging test in the field of application in Automobile electronics, SW Power Supply manufacturer, Secondary Battery.
To achieve large capacity for testing application at low cost, PLZ1004W can be expanded up to 9kW by using its 2kW booster unit (PLZ2004WB).

Features

  • High-speed response and variable slew-rate
    With PLZ-4W series, a faster response of rise/fall time as calculated conversion value with 10 µs is made possible, enabling a transient response test for the direct current and accurate reproduction of a simulation waveform as a dummy load. In addition, it also can be set with a slew rate (A/µs ). As for the setting value, it can be varied continuously, and be possible to optimize transient control for voltage drops due to wiring inductance, constant-voltage power supply, etc., when the load current is switched on.
  • 0(Zero)V input
    The 164WA and 664WA of PLZ-4W series permit a load input up to the rated current even when the Input Voltage is set for 0(Zero)V.
  • Sequence function
    Sequence patterns set as you requested can be saved in the built-in memory. In the sequence program, 10 normal sequences and 1 first sequence can be saved. 256 steps of normal sequences, and 1024 steps of the first sequence can be saved in each program.
  • Convenient function for discharging test of cells
    The PLZ4W can measure the time from load-on to load-off. When combined with under voltage protection (UVP) function, the time from when the battery discharge is started until the battery voltage falls to the cutoff voltage can be measured. Also, you can set the timer so it will load-off automatically after a specified time elapses from load-on mode. Once this timer is set, the input voltage value immediately before load-off is displayed, so it is possible to measure the closed circuit voltage after a specified time elapses from the start of discharging battery.
  • Booster unit PLZ2004WB
    To achieve a large capacity system at low cost, the PLZ1004W has an expandable option PLZ2004WB as a booster unit. Using 1 PLZ1004W as a master unit, a maximum of 4 booster units can be parallel connected. (Max. 9kW, 1800A) Note: PLZ2004WB(Booster unit) can be used for the PLZ1004W only. It cannot be connected and used with any other model.
  • Parallel operation
    Under parallel operation, the same model can be parallel connected to a maximum of 5 units when booster unit is not used. (Max. 5kW, 1000A)
  • Various Functions
    The PLZ-4W Series has equipped with all the same functions of its former type of the PLZ-3W Series, such as the Soft-start Function, Lock Function, Short Function, ABC Memory Function, Set-up Memory Function, Switching Functions, etc.
  • GPIB, RS-232C, USB as standard equipment
  • Large-Capacity DC Electronic Load System
    The PLZ-4W SR/LP Series offers wide range of the “Large-Capacity DC Electronic Load System” that consists of the conventional electronic load model PLZ1004W and PLZ2004WB applying to the large current (maximum 2600 A) installed in the exclusive rack mount system.
    *Refer to data sheet(pdf) for details

Lineup

Model Specification
PLZ164W DC Electronic Load (E-Load), 1.5 to 150V, 33A, 165W , Rise time: 10 µ second(which converts to rise and fall times) high-speed response, Possible to perform actual Load simulation by sequence control function, Equipped with USB (Supplied as standard)
PLZ164WA DC Electronic Load (E-Load), 0 to 150V, 33A, 165W , Rise time: 10 µs (which converts to rise and fall times) high-speed response, Possible to perform actual Load simulation by sequence control function, Equipped with USB (Supplied as standard)
PLZ334W DC Electronic Load (E-Load), 1.5 to 150V, 66A, 330W , Rise time: 10 µ s (which converts to rise and fall times) high-speed response, Possible to perform actual Load simulation by sequence control function, Equipped with USB (Supplied as standard)
PLZ664WA DC Electronic Load (E-Load), 0 to 150V, 132A, 660W , Rise time: 10 µ s (which converts to rise and fall times) high-speed response, Possible to perform actual Load simulation by sequence control function, Equipped with USB (Supplied as standard)
PLZ1004W DC Electronic Load (E-Load), 1.5 to 150V, 200A, 1000W , Rise time: 10 µs (which converts to rise and fall times) high-speed response, Possible to perform actual Load simulation by sequence control function, Equipped with USB (Supplied as standard)
PLZ2004WB 2000W booster unit for model PLZ1004W dc electronic load (E-Load). Using 1 PLZ1004W as a master unit, a maximum of 4 booster units can be parallel connected. (Max. 9kW, 1800A) *PLZ2004WB can be used for the PLZ1004W only. It cannot be connected and used with any other model.
Electronic Loads

PLZ-5W Series

Posted on by Tn-tech Admin

Multifunctional DC Electronic Load (CC/CV/CR/CP) : 8 Models

Outline

The PLZ-5W Series high performance electronic load is the successor to the highly respected PLZ-4W series, whilst still retaining the same high specification and build quality. Advances include a high visibility color display, low voltage operation from a minimum of 1 V to a maximum of 150 V. Programmable profiles of voltage/current can be applied (using the new ARB function, as used in LED/solar testing) in addition to the inherited 6 modes of operation: Constant Current, Constant Resistance, Constant Voltage, Constant Power, Constant Current + Constant Voltage, Constant Resistance + Constant Voltage.
Equipped with a high-speed response feature boasting a maximum slew rate of 60 A/μs (PLZ1205W) and a minimum setting resolution of 10 μA (PLZ205W). Additional features of the PLZ-5W series include: Soft-start function, variable slew rate, selectable response (CV/CR mode), switching function, ABC preset memory, 20 user-defined set-up configurations, and a sequence operation function. The advanced high-speed response makes the PLZ-5W ideal for the development and testing of today’s modern power supplies that require variable high-speed current changes. This advantage extends to the testing of current clamps/transducers.
The PLZ-5W Series is available in 4 standard models which can be incrementally extended by adding additional booster units (PLZ2405W) to achieve a maximum of 10.8 kW / 2160 A DC electronic load.
The following communication interfaces are installed as standard: LAN (LXI compliant), USB, RS232C and analog control. An optional GPIB interface is available.

Features

  • Color liquid crystal display (LCD)
    High visibility color display. The voltage, current, power, current capacity (Ah) and power capacity (Wh) values are conveniently displayed.
  • Maximum Slew Rate of 60 A/μs
    Achieving a rise time of 4 μS to reach the rated current of the electronic load. Power supply evaluation demands a fast transient response which the PLZ-5W series achieves with ease.
  • High speed voltage tracking characteristics
    High speed voltage tracking characteristic in CR mode is perfect for applications such as startup tests for power supplies.
  • Communication interfaces are included as standard
    LAN (LXI) / USB / RS232C as standard interface.　Use a browser from a PC, smartphone, or tablet to access the web server built into the PLZ-5W series for convenient control and monitoring. *GPIB Option
  • Sequence Creation Software Wavy for PLZ-5W (SD023-PLZ-5W)
    The Wavy for PLZ-5W (SD023-PLZ-5W) is an application software that supports sequence creation and the operation of the Kikusui power supplies and the electronic load. The “Wavy” software allows you to create and edit sequences visually using a mouse without programming knowledge. It enables you to control the electronic load for such monitoring the voltage and current, logging and so on.
  • Arbitrary I-V characteristics (ARB) mode
    In ARB mode arbitrary I-V characteristics can be set by entering multiple I-V points (voltage and current value set points). From 3 to 100 points can be registered and the space between two points is automatically linearly interpolated. This mode can be used for simulation of LED loads and other DUT’s with non-linear characteristics.
  • Booster (PLZ2405WB)
    Achieving 2400 W in “2U” size. Connecting up to 4 booster (PLZ2405WB) units with the master (PLZ1205W) increases the maximum system capability to 10.8 kW 2160 A. The optional parallel cable (PC01-PLZ-5W) is reguired to connect between the master and slave/booster units.
    *PLZ2405WB is a dedicated booster for PLZ1205W. It cannot be used with any other model.
  • Parallel operation
    Multiple units of the same type can be connected in parallel. Without using boosters, you can connect up to five units of the same model in parallel, including the master unit (max. 6 kW, 1200 A). In the parallel connection configuration, one control master operates with one or more slave units, enabling you to control the entire system and view the sum of the combines data on the master unit’s panel. To connect the units requires the use of as many optional parallel cables (PC01-PLZ-5W) as the number of units to be connected.
    *The PLZ2405WB (Booster) comes with 1 pc. of parallel operation cable (PC01-PLZ-5W).
  • PLZ-5W SR Large scale system SR Series (Smart Rack)
    The compact, large scale system, SR (Smart Rack) Series is available. The input power is available in 6 kW, 10.8 kW, 15.6 kW, and 20.4 kW. The maximum input current is 2160 A. (*1200 A for PLZ6005W)

Lineup

Model Specification
PLZ205W DC Electronic Load: Max. 200 W, 1–150 V, 40 A. Equipped with six modes (Constant Current / Constant Resistance / Constant Voltage / Constant Power / Constant Current + Constant Voltage / Constant Resistance + Constant Voltage) plus Arbitrary I-V Characteristics (ARB) mode to reproduce nonlinear load characteristics. High-speed response with 4 μs start-up time. Sequence control functionality enables actual-load simulations. Parallel operation enables scalability. Comes with LAN, RS-232C and USB communication interfaces installed as a standard feature. *GPIB Option
PLZ405W DC Electronic Load: Max. 400 W, 1–150 V, 80 A. Equipped with six modes (Constant Current / Constant Resistance / Constant Voltage / Constant Power / Constant Current + Constant Voltage / Constant Resistance + Constant Voltage) plus Arbitrary I-V Characteristics (ARB) mode to reproduce nonlinear load characteristics. High-speed response with 4 μs start-up time. Sequence control functionality enables actual-load simulations. Parallel operation enables scalability. Comes with LAN, RS-232C and USB communication interfaces installed as a standard feature. *GPIB Option
PLZ1205W DC Electronic Load: Max. 1200 W, 1–150 V, 240 A. Equipped with six modes (Constant Current / Constant Resistance / Constant Voltage / Constant Power / Constant Current + Constant Voltage / Constant Resistance + Constant Voltage) plus Arbitrary I-V Characteristics (ARB) mode to reproduce nonlinear load characteristics. High-speed response with 4 μs start-up time. Sequence control functionality enables actual-load simulations. Parallel operation enables scalability. Comes with LAN, RS-232C and USB communication interfaces installed as a standard feature. *GPIB Option
PLZ2405WB Booster unit for PLZ1205W: Max. 2400 W, 1–150 V, 480 A. Able to connect up to four PLZ2405WB units in parallel to each PLZ1205W master unit (max. 10.8 kW, 2160 A). (Dedicated booster for PLZ1205W. Unable to connect to other models.)
PLZ6005W SR Large-capacity electronic load assembled with PLZ1205W and booster using dedicated rack parts. 6000 W, 1–150 V, 1200 A. Comes with digital interfaces (LAN, USB and RS-232C) as a standard feature. Capable of operation using the Sequence Creation software “Wavy.”
PLZ10005W SR Large-capacity electronic load assembled with PLZ1205W and booster using dedicated rack parts. 10.8 kW, 1–150 V, 2160 A. Comes with digital interfaces (LAN, USB and RS-232C) as a standard feature. Capable of operation using the Sequence Creation software “Wavy.”
PLZ15005W SR Large-capacity electronic load assembled with PLZ1205W and booster using dedicated rack parts. 15.6 kW, 1–150 V, 2160 A. Comes with digital interfaces (LAN, USB and RS-232C) as a standard feature. Capable of operation using the Sequence Creation software “Wavy.”
PLZ20005W SR Large-capacity electronic load assembled with PLZ1205W and booster using dedicated rack parts. 20.4 kW, 1–150 V, 2160 A. Comes with digital interfaces (LAN, USB and RS-232C) as a standard feature. Capable of operation using the Sequence Creation software “Wavy.”

 

Power Supply Controllers

PIA4800 Series

Posted on by Tn-tech Admin

Power Supply Controller Supporting Multiple Channels : 5 Models


Outline

The PIA4810 is a power supply controller capable of analog and digital control. It is equipped with the GPIB and RS-232C interfaces and 4 slots, which allow 4 each of PIA4800 Series-specific control boards to be installed. A control board is capable of analog control of 2 channels of DC power supplies or electronic loads; a total of 8 channels can be controlled.
Moreover, DC power supplies with a digital remote-control function, such as the Kikusui PAS, PAM(*1) and PMR Series, can be directly connected to the PIA4830 via a TP-BUS (twisted pair bus), enabling a system up to 32 channels to be controlled digitally.
PIA4820 is an expansion unit that can be connected to the PIA4810 or PIA4830 via a TP-BUS to provide additional control channels. In the same way as the PIA4810, it allows a maximum of 4 control boards to be installed.
Then it is possible to use up to 3 units of PIA4820 as an expansion that can be connected to the PIA4810 via the TP-BUS, the system is capable of controlling a maximum of 32 channels. Moreover, the combined use of the GPIB and TP-BUS allows the system to control a maximum of 448 channels.
PIA4830 is a power supply controller only for digital control. It is capable of digitally controlling a system up to 32 channels of such Kikusui PAS, PAM(*1) and PMR Series DC power supplies via the TP-BUS.
OP01-PIA and OP02-PIA are control boards designed exclusively for the PIA4810 and PIA4820. A single control board is capable of analog control of 2 channels of DC power supplies or electronic loads. The OP01-PIA is a full-control board with voltage and current setting and read-back functions, while the OP02-PIA4800 has only the voltage and current setting feature.
(*1) The TP-BUS interface option is factory installed option, this option should be indicated when ordering.

Lineup

Model Specification
PIA4810 The power supply controller capable of analog and digital control. It is equipped with the GPIB and RS-232C interfaces and 4 slots, which allow 4 each of PIA4800 Series-specific control boards to be installed. A control board is capable of analog control of 2 channels of DC power supplies or electronic loads; a total of 8 channels can be controlled
PIA4820 The expansion unit that can be connected to the PIA4810 or PIA4830 via a TP-BUS to provide additional control channels. In the same way as the PIA4810, it allows a maximum of 4 control boards to be installed.
PIA4830 The power supply controller only for digital control. It is equipped with the GPIB and RS-232C interfaces. And it is capable of digitally controlling of Kikusui PWR, PAS, PAM and PMR Series DC power supplies via the TP-BUS.
OP01-PIA The control board designed exclusively for the PIA4810 and PIA4820. A single control board is capable of analog control of 2 channels of DC power supplies or electronic loads. The OP01-PIA is a full-control board with voltage and current setting and read-back functions,
OP02-PIA The control board designed exclusively for the PIA4810 and PIA4820. A single control board is capable of analog control of 2 channels of DC power supplies or electronic loads. The OP02-PIA has only the voltage and current setting feature.
Power Supply Controllers

PIA4850

Posted on by Tn-tech Admin

Power Supply Controller with USB


Outline

The PIA4850 is a power supply controller with USB interface to control Kikusui DC power supply with TP-BUS. PAS Series, PWR Series or other models that equips TP-BUS can be digitaly controled by PC, as well as for read-back of output values and status monitoring. It operates using bus power and with its simple system and compact structure, you can use whenever you need with easy setup.

Features

  • USB 2.0 compatible
  • Can be used with Windows Vista/XP/2000.
  • Operates using bus power. Requires no AC adapter.
  • Bus power operation. No AC adapter required.
  • Allows read-back of output values and status monitoring.
  • Can control up to 32(*1) DC power supplies that equip TP-BUS(*2).
    (Different power supply models can be combined.)
    TP-BUS connection can be extended up to 200 m. Ideal for remote monitoring !

*1: The maximum controlable units are 31 when the connections include PAM series or PMR series unit.
*2: TP-BUS (Twist-Pair BUS) is an original Kikusui interface.

Lineup

Model Specification
PIA4850 The power supply controller only for digital control. It is equipped with the USB interface. And it is capable of digitally controlling of Kikusui PWR, PAS, PAM and PMR Series DC power supplies via the TP-BUS.
English EN Vietnamese VI