Author Archives: Tn-tech Admin

AC Power Supplies

PCR-W/W2 Series

Posted on by Tn-tech Admin

High Efficiency AC Power Supplies (CV/CF) : 5 Models


Outline

With a primary development concept of improved efficiency and low cost, the PCR-W/W2-Series, regulated AC power supply, features a balance of performance, function, quality, and cost based on the technology and know-how established with the PCR-L Series of products. Specifically, PWM inverter system was used for the power unit, providing the power supply with improved efficiency (by approximately 75 %), low-input current demand, and a considerably downsized and lightweight package design. The PCR-W/W2-Series power supply features a wide input range and high-quality, powerful output (as well as a reduction in low-waveform distortion, and the provision of high response speed and low power-factor load) for worldwide application, and is equipped not only with measurement and output capabilities for AC parameters such as RMS value, peak value, power, and power factor, but also with DC output and AC+DC output modes. With these features, the capabilities of the PCR-W/W2-Series power supply go beyond ordinary AC power supply, providing greater convenience.
Moreover, with one unit of the PCR-W2-Series product, utilization of both single-phase and three-phase outputs of the same capacity is possible simply by changing the position of the selector switch. This enables the user to eliminate installation of individual single-phase and three-phase systems as had previously been necessary, thus enabling the budget and space to be utilized more efficiently.

Features

  • Low Noise and High Speed
    High quality output like that of the linear amplifier system has been achieved: voltage waveform distortion less than 0.5%, voltage response speed of 60 µ s (standard value).
  • Measuring Function
    Output voltage/current real effective value, peak value, DC mean value, and electric power are displayed on the panel. Using optional accessories, power factor, VA measurement and peak hold current measurement are also possible.
  • For Automatic Production Lines
    Applicable to GPIB or RS-232C control. The PCR-W Series can be used in automatic production and inspection lines. It is equipped with a voltage-drop sensor, and regulation adjustment functions.

Lineup

Model Specification
PCR4000W Scheduled to be Discontinued.
Single phase 4kVA, AC1 to 300V, 1 to 500.0Hz, DC+/-1.4 to +/-424V, PWM type
PCR8000W Scheduled to be Discontinued.
Single phase 8kVA , AC1 to 300V, 1 to 500.0Hz, DC+/-1.4 to +/-424V, PWM type
PCR12000W Scheduled to be Discontinued.
Single phase 12kVA , AC1 to 300V, 1 to 500.0Hz, DC+/-1.4 to +/-424V, PWM type
PCR6000W2 Scheduled to be Discontinued.
6kVA, Single phase and 3-phase selectable, AC1 to 300V, 1 to 500.0Hz, DC+/-1.4 to +/-424V, PWM type
PCR12000W2 Scheduled to be Discontinued.
12kVA, Single phase and 3-phase selectable, AC1 to 300V, 1 to 500.0Hz, DC+/-1.4 to +/-424V, PWM type
AC Power Supplies

PCR-M Series

Posted on by Tn-tech Admin

Compact AC Power Supplies (CV/CF) : 4 Models


Outline

The PCR-M Series is a small-size AC power supply with the ease of a variable auto transformer or an automatic voltage regulator (AVR) and the usefulness of a multifunctional AC power supply. As the PWM inverter method is adopted for the power unit, the PCR-M Series is much smaller and lighter than the predecessors while enabling high-quality and highly-efficient (about 70%) operation. This power supply comes with measurement functions, memory function, protection functions and various communication interface options, and it is even possible to provide DC power. When you incorporate an optional analog interface board (EXO4-PCR-M), the PCR-M Series can also be used as a booster for arbitrary signal generator. This small and versatile unit can provide you with more work styles than you can imagine. You can’t do without it once you use it!

Features

  • Compact design
    Small enough to fit on your work desk !
    Only 214W X 124H X 350D mm !
    Weights only 6 kg and easy to carry !
    (PCR500M)
  • Versatile output modes
    Three modes (AC, DC, AC+DC) are available. *1
    The frequency range is up to 500 Hz.
  • Memory function
    You can store and recall three combinations of settings for voltage and frequency on the main unit. By calling the memory during output, you can test the sudden changes of voltage or frequency.*2
  • Measurement functions
    You can measure the voltage, current and power of AC and DC output, apparent power, reactive power, power factor, crest facter and current peak hold.*3
  • Various communication interface options
    RS-232C is provided as standard. GPIB and USB are optional.
  • Analog interface
    By incorporating an optional analog interface (EXO4-PCR-M), output can be controlled by using external analog signals. Input DC signals can be used to change output AC voltage and boost input waveform.
  • Control using a PC
    You can control the PCR-M Series through the standard RS-232C interface, the optional GPIB interface, or the optional USB interface. And by using the control software (Easy Controller for PCR-M) which comes with the PCR-M Series , you can easily set the parameters of the PCR-M Series and log the output measured values.
    Easy Controller for PCR-M

*1 You can access AC+DC mode if you have installed an optional interface board of IB21, US21 or EX04-PCR-M. The communications interface is used to set that mode.
*2 An installed appropriate optional interface board allows up to ten combinations of settings to be stored in the memory. The communications interface is also used to set or call extended memory addresses (4 to 10).
*3 You can use the communications interface to measure apparent power (VA), reactive power (VAR), power factor (PF), crest factor (CF), and held current peak.

Lineup

Model Specification
PCR500M Scheduled to be Discontinued.
Single phase 500VA, AC1 to 270V, 40 to 500Hz, DC+/-1.4 to +/-380V, PWM type
PCR1000M Scheduled to be Discontinued.
Single phase 1000VA, AC1 to 270V, 40 to 500Hz, DC+/-1.4 to +/-380V, PWM type
PCR2000M Scheduled to be Discontinued.
Single phase 2000VA, AC1 to 270V, 40 to 500Hz, DC+/-1.4 to +/-380V, PWM type
PCR4000M Scheduled to be Discontinued.
Single phase 4000VA, AC1 to 270V, 40 to 500Hz, DC+/-1.4 to +/-380V, PWM type
AC Power Supplies

PCR-LE2 Series

Posted on by Tn-tech Admin

Multi-output AC Power Supplies (CV/CF) : 5 Models

Outline

The PCR-LE2 Series are designed based on the PCR-LE Series that supports single-phase output, single-phase 3-wire output, and three-phase output within the rated capacity by selecting the switch from the front panel operation.
The PCR-LE2 series offer the same basic performance, using the common power unit of the PCR-LE Series, with providing easier installation and saving the space more efficiently compare to the individual allocation of the system for a single phase, single-phase 3-wire, and three phase systems. The lineup of PCR-LE2 Series are available in 5 models:6 kVA, 9 kVA, 12kVA, 18kVA, and 27 kVA model.

Features

  • Wide-ranging specs DC output also supported
    • Output voltage rating (AC): 1 to 300V
    • Output frequency rating: 1 to 999.9Hz
    • Output voltage rating (DC): ± 1.4 to ± 424V

    In addition, the system supports a DC output mode and AC + DC output mode. The system can be useful in a wider range of fields such as chemistry- and physics-related areas.

  • Selectable response mode
    Allows select of a response mode for the internal amplifier system depending on the load condition and application.

    • Normal response (MEDIUM）: for testing various power supply environments
    • Highly stable response (SLOW): for power supply for EMC testing sites
  • Power line abnormality simulation
    In AC mode, it is possible to simulate power line abnormalities by setting the output of the PCR-LE2 series system to the state of a power outage, voltage drop (dip), or voltage increase (pop). This allows the ability to test switching power supplies and electronic equipment.
  • Various measuring functions
    Output voltage/current RMS values, peak voltage/current, effective power/apparent power, and power factor can be measured. It is possible to analyze harmonics (up to 40th order) of the output current.
  • Sequence function
    The output voltage, frequency, and waveform can be changed along the way, thus, power supply environment testing can be automated. In addition to AC output, DC output and AC + DC output in sequence are also available. With the resolution setting by increments of 0.1 ms, the system provides functions to set the starting phase, sudden phase shift, as well as a jump and pause function.
  • Sensing, Regulation adjustment
    Even in cases in which load units are installed remotely, the voltage (RMS value) at the end of the load can be stabilized through correction of voltage drops. Hardware sensing and software sensing are provided as sensing function, allowing you to selectively use either one accordingly with the load condition and application.
  • Output current control
    The current limiting function enables you to control the output current (RMS) at a certain level for continuous operation by a selectable time setting (time/continuous) for a trip operation. Continuity tests for electric facilities (distribution panels, circuit breakers, devices for wiring, etc.) can be performed under stable conditions.
  • Eco-friendly function (Power-conservation function)
    • Sleep function
      The power unit goes into the sleep mode when no output is detected for a certain time to cut down on the power consumption.
    • Energy-saving operation function
      You can utilize the energy-saving function to operate only the necessary power unit(s) depending on the required supply load.
  • External communication
    RS232C (equipped as a standard). Remote control available with GPIB, USB, and LAN as options. Using LAN makes it possible to configure highly cost-effective systems, as LXI standard is supported.
  • Memory function
    It is possible to store up to 99 data sets of the output frequency, voltage (AC/DC), and a cyclic waveform under the waveform bank number on the memory of the main unit.
    In addition, you can use USB memory devices to store the data contained on the main unit memory, panel settings, power line abnormality simulations, and sequence data.
  • Standard supported
    Usable for systems to test conformance to the IEC61000-3 and 4 Series standards. Optional applications software also offered. Please refer to the end of the brochure for details.
  • Front panel serving as a remote control
    The front panel is detachable. With the optional extension cable (EC05-PCR), the panel functions as a remote control.
  • For “system interconnection tests” with reverse load flow
    Conforming to the guideline for requirements of system interconnection technologies
    *All the simulated reverse load flow power is consumed internally, thus, there will be no reverse load flow to the system.
  • Excellent maintenance ability due to the unit configuration
    The PCR-LE2 series are a unit type configuration.The power unit can be serviced (replaced) by the unit of 1 kVA.
  • Other functions
    • Setting output impedance
    • Measuring harmonics current
    • Soft start (Rise time control)
    • Internally fixed Vcc

Lineup

Model Specification
PCR6000LE2 Single phase 6kVA / single-phase 3-wire 4kVA / three-phase 6kVA, AC1 to 300V, 1 to 999.9Hz, DC+/-1.4 to +/-424V, Liner-amp type, accommodate to power supply environment testing
PCR9000LE2 Single phase 9kVA / single-phase 3-wire 6kVA / three-phase 9kVA, AC1 to 300V, 1 to 999.9Hz, DC+/-1.4 to +/-424V, Liner-amp type, accommodate to power supply environment testing
PCR12000LE2 Single phase 12kVA / single-phase 3-wire 8kVA / three-phase 12kVA, AC1 to 300V, 1 to 999.9Hz, DC+/-1.4 to +/-424V, Liner-amp type, accommodate to power supply environment testing
PCR18000LE2 Single phase 18kVA / single-phase 3-wire 12kVA / three-phase 18kVA, AC1 to 300V, 1 to 999.9Hz, DC+/-1.4 to +/-424V, Liner-amp type, accommodate to power supply environment testing
PCR27000LE2 Single phase 27kVA / single-phase 3-wire 18kVA / three-phase 27kVA, AC1 to 300V, 1 to 999.9Hz, DC+/-1.4 to +/-424V, Liner-amp type, accommodate to power supply environment testing
AC Power Supplies

PCR-LE Series

Posted on by Tn-tech Admin

High-performance multifunctional AC Power Supplies (CV/CF) : 7 Models

Insert content here…


Outline

The PCR-LE Series is a new line of advanced multifunctional AC power supply that has been developed from our PCR-L/LA Series (linear amplifier type). The PCR-LE Series provides high reliability and can be applied to various applications, by taking advantage of the features that can control broadband waveform freely. Moreover, the PCR-LE Series can be configured as a core device of a test system combined with E-loads and Power Analyzers for “Grid Connection Testing” in regard to dispersed power generation, such as Solar Power, Wind Power, Fuel Cell, and Gas Engine referred to as “New Energy Field”.
With various options, the low frequency immunity test and various power enviroment tests are supported. The options for parallel operation and three-phase operation enable you to expand a single-phase system up-to 27kVA, single-phase three wires up-to 54kVA, and a three-phase system up to 81kVA. The system can be applied to a large-scale EMC site for testing of industrial high-capacity air conditioners.

[Related Products] Multi-output model PCR-LE2 Series
The PCR-LE2 Series are designed based on the PCR-LE Series that supports single-phase output, single-phase 3-wire output, and three-phase output within the rated capacity by selecting the switch from the front panel operation.

Features

  • Wide-ranging specs DC output also supported
    • Output voltage rating (AC): 1 to 300V
    • Output frequency rating: 1 to 999.9Hz
    • Output voltage rating (DC): ± 1.4 to ± 424V

    In addition, the system supports a DC output mode and AC + DC output mode. The system can be useful in a wider range of fields such as chemistry- and physics-related areas.

  • Selectable response mode
    Allows select of a response mode for the internal amplifier system depending on the load condition and application.

    • High-speed response (FAST): *for requesting a rate of power rise/fall
    • Normal response (MEDIUM）: for testing various power supply environments
    • Highly stable response (SLOW): for power supply for EMC testing sites

    *Excluding PCR6000LE and PCR9000LE

  • Power line abnormality simulation
    In AC mode, it is possible to simulate power line abnormalities by setting the output of the PCR-LE series system to the state of a power outage, voltage drop (dip), or voltage increase (pop). This allows the ability to test switching power supplies and electronic equipment.
  • Various measuring functions
    Output voltage/current RMS values, peak voltage/current, effective power/apparent power, and power factor can be measured. It is possible to analyze harmonics (up to 40th order) of the output current.
  • Sequence function
    The output voltage, frequency, and waveform can be changed along the way, thus, power supply environment testing can be automated. In addition to AC output, DC output and AC + DC output in sequence are also available. With the resolution setting by increments of 0.1 ms, the system provides functions to set the starting phase, sudden phase shift, as well as a jump and pause function.
  • Sensing, Regulation adjustment
    Even in cases in which load units are installed remotely, the voltage (RMS value) at the end of the load can be stabilized through correction of voltage drops. Hardware sensing and software sensing are provided as sensing function, allowing you to selectively use either one accordingly with the load condition and application.
  • Output current control
    The current limiting function enables you to control the output current (RMS) at a certain level for continuous operation by a selectable time setting (time/continuous) for a trip operation. Continuity tests for electric facilities (distribution panels, circuit breakers, devices for wiring, etc.) can be performed under stable conditions.
  • Eco-friendly function (Power-conservation function)
    • Sleep function
      The power unit goes into the sleep mode when no output is detected for a certain time to cut down on the power consumption.
    • Energy-saving operation function*
      You can utilize the energy-saving function to operate only the necessary power unit(s) depending on the required supply load.
      *Excluding PCR500LE and PCR1000LE
  • External communication
    RS232C (equipped as a standard). Remote control available with GPIB, USB, and LAN as options. Using LAN makes it possible to configure highly cost-effective systems, as LXI standard is supported.
  • Memory function
    It is possible to store up to 99 data sets of the output frequency, voltage (AC/DC), and a cyclic waveform under the waveform bank number on the memory of the main unit.
    In addition, you can use USB memory devices to store the data contained on the main unit memory, panel settings, power line abnormality simulations, and sequence data.
  • Standard supported
    Usable for systems to test conformance to the IEC61000-3 and 4 Series standards. Optional applications software also offered. Please refer to the end of the brochure for details.
  • Front panel serving as a remote control
    The front panel is detachable. With the optional extension cable, the panel functions as a remote control.
    You can operate the PCR-LE unit installed under your work desk/work bench remotely from the front panel connected with the optional extension cable (EC05-PCR).
  • Downsizing
    Comparison with the existing PCR-LA (4 kVA)
  • For “system interconnection tests” with reverse load flow
    Conforming to the guideline for requirements of system interconnection technologies
    *All the simulated reverse load flow power is consumed internally, thus, there will be no reverse load flow to the system.
  • Specifications for large capacity
    It is possible to expand to 27 kVA (single phase), 54 kVA (single phase 3-wire), and 81 kVA (three phase) by using the parallel, single phase 3-wire, and three phase operation options (expansion operation drivers). This allows the system to be used for large-scale EMC site power or as test power for large-capacity industrial air conditioners.

    • Parallel operation
      2 kVA or higher model / Max. connectable units: 5 / Max. expansion capacity: Single phase 27 kVA
      (Can be expanded to 54 kVA (single phase 3-wire) or 81 kVA (three phase) when used in combination with the single phase 3-wire option or three phase option.)
      *The separately-sold expansion operation driver is required.
    • Single phase 3-wire, three phase operation
      All models / Max. expanded capacity: 54 kVA (single phase 3-wire), 81 kVA (three phase)
      (When used in combination with the parallel operation option)
      * The separately-sold expansion operation driver is required.
  • Excellent maintenance ability due to the unit configuration
    The PCR-LE series (excluding PCR500LE) are a unit type configuration.The power unit can be serviced (replaced) by the unit of 1 kVA.
  • Other functions
    • Setting output impedance
    • Measuring harmonics current
    • Soft start (Rise time control)
    • Internally fixed Vcc

Lineup

Model Specification
PCR500LE Single phase 500VA, AC1 to 300V, 1 to 999.9Hz, DC+/-1.4 to +/-424V, Liner-amp type, accommodate to power supply environment testing
PCR1000LE Single phase 1kVA, AC1 to 300V, 1 to 999.9Hz, DC+/-1.4 to +/-424V, Liner-amp type, accommodate to power supply environment testing
PCR2000LE Single phase 2kVA, AC1 to 300V, 1 to 999.9Hz, DC+/-1.4 to +/-424V, Liner-amp type, accommodate to power supply environment testing
PCR3000LE Single phase 3kVA, AC1 to 300V, 1 to 999.9Hz, DC+/-1.4 to +/-424V, Liner-amp type, accommodate to power supply environment testing
PCR4000LE Single phase 4kVA, AC1 to 300V, 1 to 999.9Hz, DC+/-1.4 to +/-424V, Liner-amp type, accommodate to power supply environment testing
PCR6000LE Single phase 6kVA, AC1 to 300V, 1 to 999.9Hz, DC+/-1.4 to +/-424V, Liner-amp type, accommodate to power supply environment testing
PCR9000LE Single phase 9kVA, AC1 to 300V, 1 to 999.9Hz, DC+/-1.4 to +/-424V, Liner-amp type, accommodate to power supply environment testing
DC Power Supplies

PBZ Series

Posted on by Tn-tech Admin


Outline

The PBZ series is a bipolar type DC regulated power source that can continuously change both + and – polarities passing through 0 without changing the output terminal.
By adopting a “Switching + Linear” system, the PBZ is able to realize both drastic weight reduction as well as high speed and low noise operation. Since operation covers 4 quadrants, power can be both supplied (source) and absorbed (sink). The PBZ can also drive inductive or capacitive loads. The unit also equips a signal generator function which enables waveform and sequence creation. The PBZ is also capable of synchronized operation which is required for voltage variation tests, and it can also be expanded for large current applications through master-slave parallel operation.

Features

  •  Low ripple and noise (in CV mode)
    For the Ripple 2mVrms, Noise 20mVp-p (PBZ20-20)

    *PBZ40-10 :Ripple 4 mVrms, noise 20 mVp-p
    *PBZ60-6.7 :Ripple 4 mVrms, noise 30 mVp-p
    *PBZ80-5 :Ripple 4 mVrms, noise 30 mVp-p

  •  Waveform generation function
    In addition to the basic sine, square and triangular waveforms, the PBZ series is equipped with a user-defined waveform generating function that can register up to 16 waveforms. It allows the amplitude, frequency, start phase, frequency sweep and square wave duty to be set as needed.
    The 16 user-defined waveforms can be freely edited, and the original created and edited waveforms can be registered and easily recalled for use. The sequence function allows each waveform to be set as a single step, and a maximum of 1024 steps can be set in the 16 programs.
  •  Sequence function
    The basic sine, triangular and square waveforms, as well as the 16 user-defined waveforms, can each be set as a sequence step, allowing even complex sequences to be created easily. Sequences are composed of up to 1024 steps.This combination of steps forms a program, and the 1024 steps can be allocated and set in a maximum of 16 programs. When executing sequences, in addition to executing a single program, the script function also allows multiple programs to be combined and executed as needed.
    A script is a function that specifies the sequence and number of repetitions for the set programs. A maximum of 50 lines can be set in 1 script. 1 script can be set each for CV and CC mode.
    As shown in the figure, when Program 1 uses 8 steps, 1024 – 8 = 1016, the remaining 1016 steps can be allocated to the remaining 15 programs.
  •  Synchronized operation function
    This function synchronizes the power output when a sequence is executed using multiple PBZ.It prevents time deviations from occurring even when a long sequence is executed.
    * A delay of up to 1μ s occurs at the start.
  •  Parallel operation function
    This function expands the output current. It allows multiple units to be connected in parallel according to the required current. With 2 standard units of the same model and the optional parallel operation kit, the user can easily complete the setup.
    Although up to 5 units can be operated in parallel, if 3 or more units will be used, please consult with us.
  •  Unipolar mode
    This is a function unique to this product. Because the voltage is unipolar, this function is called “unipolar mode”. With unipolar power, although the current flows in a single direction, in unipolar mode it is still possible to apply current in both directions (source and sink). As shown in the diagram, on a graph with perpendicular axes of voltage (vertical) and current (horizontal), operation is possible in quadrant 1st and 2nd quadrants (2 quadrants). In bipolar mode, there are power restriction areas (PBZ20-20: 100W, PBZ40-10: 180W, PBZ60-6.7/PBZ80-5: 200W) in 2nd and 4th quadrants. However in unipolar mode, operation is possible in the full area of 2 quadrants.
  • Control via browser (”with LAN” model)
    The LAN interface applies to the LXI (LAN eXtensions for Instrumentation)*. If that interface is used, it is possible to control and monitor the power supply from a browser.
    *PBZ60-6.7 and PBZ80-5 are under application.
  •  Others 
    • CV/CC selectable mode
    • Memory function
    • Protection functions (Over voltage/Over current/Over heat/ Power limit)
    • Fine setting
    • Key lock
    • Remote sensing
    • Output voltage/current monitor
    • External voltage/resistance control
    • External signal input
    • Status signal output
  •  Rack system (PBZ SR/BP series)
    The PBZ SR/BP series is a series of high-power bipolar DC stabilized power supplies. The PBZ SR/BP series are designed based on the PBZ Intelligent Bipolar power supply series, that supports large currents (up to ±200 A) and is assembled with exclusive rack system (Smart Rack). The4-quadrant operation allows the power to be supplied (source) or absorbed (sink), and it is suitable for driving inductive loads or capacitive loads. Also, the PBZ SR/BP series are equipped with LAN, USB, GPIB, and RS232C as standard communication interfaces.

  • Lineup

    Model Specification
    PBZ20-20  Manual…±0 to 20V / ±0 to 20A
    PBZ20-20 with LAN ±0 to 20V / ±0 to 20A, Equipped with LAN interface (LXI compliance)
    PBZ40-10  Manual…±0 to 40V / ±0 to 10A
    PBZ40-10 with LAN ±0 to 40V / ±0 to 10A, Equipped with LAN interface (LXI compliance)
    PBZ60-6.7  Manual…±0 to 60V / ±0 to 6.7A
    PBZ60-6.7 with LAN ±0 to 60V / ±0 to 6.7A, Equipped with LAN interface (LXI compliance)
    PBZ80-5  Manual…±0 to 80V / ±0 to 5A
    PBZ80-5 with LAN ±0 to 80V / ±0 to 5A, Equipped with LAN interface (LXI compliance)
    PBZ20-60 SR ±0 to 20V / ±0 to 60A, Equipped with LAN interface (LXI compliance)
    PBZ20-80 SR ±0 to 20V / ±0 to 80A, Equipped with LAN interface (LXI compliance)
    PBZ20-100 SR ±0 to 20V / ±0 to 100A, Equipped with LAN interface (LXI compliance)
    PBZ40-30 SR ±0 to 40V / ±0 to 30A, Equipped with LAN interface (LXI compliance)
    PBZ40-40 SR ±0 to 40V / ±0 to 40A, Equipped with LAN interface (LXI compliance)
    PBZ40-50 SR ±0 to 40V / ±0 to 50A, Equipped with LAN interface (LXI compliance)
    PBZ60-20.1 SR ±0 to 60V / ±0 to 20.1A, Equipped with LAN interface (LXI compliance)
    PBZ60-26.8 SR ±0 to 60V / ±0 to 26.8A, Equipped with LAN interface (LXI compliance)
    PBZ80-15 SR ±0 to 80V / ±0 to 15A, Equipped with LAN interface (LXI compliance)
    PBZ60-33.5 SR ±0 to 60V / ±0 to 33.5A, Equipped with LAN interface (LXI compliance)
    PBZ80-20 SR ±0 to 80V / ±0 to 20A, Equipped with LAN interface (LXI compliance)
    PBZ80-25 SR ±0 to 80V / ±0 to 25A, Equipped with LAN interface (LXI compliance)
    PBZ20-120 BP ±0 to 20V / ±0 to 120A, Equipped with LAN interface (LXI compliance)
    PBZ20-140 BP ±0 to 20V / ±0 to 140A, Equipped with LAN interface (LXI compliance)
    PBZ20-160 BP ±0 to 20V / ±0 to 160A, Equipped with LAN interface (LXI compliance)
    PBZ20-180 BP ±0 to 20V / ±0 to 180A, Equipped with LAN interface (LXI compliance)
    PBZ20-200 BP ±0 to 20V / ±0 to 200A, Equipped with LAN interface (LXI compliance)
    PBZ40-60 BP ±0 to 40V / ±0 to 60A, Equipped with LAN interface (LXI compliance)
    PBZ40-70 BP ±0 to 40V / ±0 to 70A, Equipped with LAN interface (LXI compliance)
    PBZ40-80 BP ±0 to 40V / ±0 to 80A, Equipped with LAN interface (LXI compliance)
    PBZ40-90 BP ±0 to 40V / ±0 to 90A, Equipped with LAN interface (LXI compliance)
    PBZ40-100 BP ±0 to 40V / ±0 to 100A, Equipped with LAN interface (LXI compliance)
Chưa được phân loại

DC Power Supplies

Posted on by Tn-tech Admin

 PBZ Series

Intelligent Bi-Polar Power Supplies (Switching/Series Regulated, CV/CC)
30 Models

PBZ SeriesThe PBZ series is a bipolar type DC regulated power source that can continuously change both + and – polarities passing throu…

   

 Instruments Drivers

 PWR-01 Series -NEW-

Compact Wide Range DC Power Supply
12 Models

PWR-01 SeriesThe PWR-01 is a series of high performance, multifunctional, compact, wide-range DC power supplies. It consists of 12 models …

   

Environment & Process Monitoring

iQ Series of Gas Analyzers

Posted on by Tn-tech Admin
iQ Series of Gas Analyzers

Discover the iQ to work smarter

For true control over your data and your day, you need an instrument that is engineered to get smarter over time. Discover the non-stop intelligence of the new Thermo Scientific iQ Series Gas Analyzers, because when problems can be predicted they can be prevented. With a user-friendly touch screen display, proactive communications, and the reliability you expect from Thermo Scientific gas analyzers, you can expect true control.

Request a quote

Predictive diagnostics

Address problems before they occur with improved serviceability and plug-and-play components. 24/7 access to your analyzer’s information helps minimize troubleshooting time with innovative, interchangeable DMC modules in a highly precise, yet tough solution.

Proactive communications

Maintain optimum performance through iQ360 and email alerts. When subscribed to iQ360 service, your instrument communicates directly to our technical support team. Upon alarm activation, the team develops a corrective plan and emails it to your staff. Eliminate surprises and take control of your day with the iQ Series Gas Analyzers.

Personal device connectivity

Real time, continuous remote monitoring is now possible with the iQ companion mobile device app. The iQ app allows for remote monitoring of iQ gas analyzers, simplified ways of getting in touch with us, and instant access to both maintenance alerts and product documentation.

Discover the non-stop intelligence of the iQ Series Gas Analyzers

42iQ Series (NO-NO2-NOx) Analyzer

The Thermo Scientific™ 42iQ NO-NO2-NOx Analyzer provides the same level of performance when measuring nitrogen oxide (NO-NO2-NOx) in the emissions from a source using chemiluminescent technology.

42iQ LS Series Low Source NO-NO2-NOx Analyzer

The Thermo Scientific™ 42iQ Low Source NO-NO2-NOx Analyzer provides the same level of performance when measuring low to mid-levels of nitrogen oxides in the air using chemiluminescent technology.

43iQ Series Sulfur Dioxide Analyzer

The Thermo Scientific™ 43iQ Sulfur Dioxide Analyzer provides the same level of performance when measuring sulfur dioxide (SO2) in ambient air up to 100ppm using pulsed fluorescence technology.

48iQ Series Carbon Monoxide Analyzer

The Thermo Scientific™ 48iQ Carbon Monoxide Analyzer provides the same level of performance when measuring the amount of carbon monoxide (CO) in ambient air using the gas filter correlation technique.

49iQ Series Ozone Analyzer

The Thermo Scientific™ 49iQ Ozone Analyzer provides the same level of performance when measuring the amount of ozone in ambient air using dual-cell, UV photometric technology.

49iQ PS Series Ozone Primary Standard

The Thermo Scientific™ 49iQ Primary Standard Ozone Analyzer provides the same level of performance when producing ozone concentrations of up to 5000ppb using dual-cell, UV photometric technology.

410iQ Series Carbon Dioxide Gas Analyzer

The Thermo Scientific™ 410iQ Carbon Dioxide Gas Analyzer provides the same level of performance when measuring the concentration of carbon dioxide (CO2) in emissions using advanced NDIR optical filter technology.

410iQ Series High Level Carbon Dioxide Gas Analyzer

The Thermo Scientific™ 410iQ High Level Carbon Dioxide Gas Analyzer provides the same level of performance when measuring high levels of CO2 concentration in emissions using advanced NDIR optical filter technology.

111iQ Series Zero Air Supply

The Thermo Scientific™ 111iQ Zero Air Supply supplies pollutant-free air (zero air) from ambient air to allow for proper zeroing, and to provide clean diluent air for spanning ambient air analyzers.

146iQ Series Multi-Gas Calibrator

The Thermo Scientific™ 146iQ Multi-Gas Calibrator is used to calibrate instruments that perform zero, precision, Level 1 span checks, audits, and multi-point routines in accordance with US EPA requirements

Environment & Process Monitoring

146iQ Multi-Gas Calibrator

Posted on by Tn-tech Admin

146iQ Multi-Gas Calibrator

 Related applications: Environmental

Get 24/7 access to your analyzer’s information with the Thermo Scientific™ iQ Series Gas Analyzer. The iQ Series Gas Analyzers are engineered to get smarter over time and help minimize troubleshooting time with a highly precise, yet tough solution. The Thermo Scientific™ 146iQ Multi-Gas Calibrator provides the same level of performance when calibrating ambient air and other gas monitoring instrumentation. The output of the 146iQ Multi-Gas Calibrator is used to calibrate instruments that perform zero, precision, Level 1 span checks, audits, and multi-point routines in accordance with US EPA requirements.

 

Description

Discover the non-stop intelligence of the iQ Series Gas Analyzers, because when problems can be predicted they can be prevented.  Our next generation platform of gas analyzers includes:

Predictive Diagnostics    

Address problems before they occur with improved serviceability and plug and play components. 24/7 access to your analyzer’s  information helps minimize troubleshooting time with innovative, interchangeable DMC modules in a highly precise, yet tough solution.

Proactive Communications 

Maintain optimum performance through iQ360 and email alerts. When subscribed to iQ360 service, your instrument communicates directly to our technical support team upon alarm activation. Our technical support team develops a corrective plan and emails it to your staff. Eliminate surprises and take control of your day with the iQ Series Gas Analyzers.

Personal Device Connectivity   

Real time, continuous remote monitoring is now possible with the  iQ companion mobile device app. The iQ app allows for remote monitoring of iQ gas analyzers, simplified ways of getting in touch with us, and instant access to both maintenance alerts and product documentation.

Environment & Process Monitoring

111iQ Zero Air Supply

Posted on by Tn-tech Admin

111iQ Zero Air Supply

 Related applications: Environmental

Get 24/7 access to your analyzer’s information with a Thermo Scientific™ iQ Series Gas Analyzer. The iQ Series Gas Analyzers are engineered to get smarter over time and help minimize troubleshooting time with a highly precise, yet tough solution. The Thermo Scientific™ 111iQ Zero Air Supply provides the same level of performance when generating pollutant-free zero gas. The 111iQ supplies pollutant-free air (zero air) from ambient air to allow for proper zeroing, and to provide clean diluent air for spanning ambient air analyzers.

 

Description

Discover the non-stop intelligence of the Thermo Scientific iQ Series Gas Analyzers, because when problems can be predicted they can be prevented.  Our next generation platform of gas analyzers includes:

Predictive Diagnostics 

Address problems before they occur with improved serviceability and plug and play components. 24/7 access to your analyzer’s  information helps minimize troubleshooting time with innovative,  interchangeable DMC modules in a highly precise, yet tough solution.

Proactive Communications

Maintain optimum performance through iQ360 and email alerts. When subscribed to iQ360 service, your instrument communicates directly to our technical support team upon alarm activation. Our technical support team develops a corrective plan and emails it to your staff. Eliminate surprises and take control of your day with the iQ Series Gas Analyzers.

Personal Device Connectivity

Real time, continuous remote monitoring is now possible with the  iQ companion mobile device app. The iQ app allows for remote monitoring of iQ gas analyzers, simplified ways of getting in touch with us, and instant access to both maintenance alerts and product documentation.

Environment & Process Monitoring

49iQ Ozone Primary Standard

Posted on by Tn-tech Admin

49iQ Ozone Primary Standard

 Related applications: Environmental

Get 24/7 access to your analyzer’s information with the Thermo Scientific™ iQ Series Gas Analyzer. The iQ Series Gas Analyzers are engineered to get smarter over time and help minimize troubleshooting time with a highly precise, yet tough solution. The Thermo Scientific™ 49iQ Primary Standard Ozone Analyzer provides the same level of performance when producing ozone concentrations of up to 5000ppb using dual-cell, UV photometric technology.

Description

49iQ PS analyzer Ozonator specifications:

  • Ozonator Output: .025 – 1.000 ppm @ 3-4 LPM
  • Ozonator Response: 1 minute to 98% or 5 ppb of final value, whichever is greater
  • Ozonator Stability: ±4 ppb or ±1% of reading, whichever is greater

Discover the non-stop intelligence of the iQ Series Gas Analyzers, because when problems can be predicted they can be prevented.  Our next generation platform of gas analyzers includes:

Predictive Diagnostics   

Address problems before they occur with improved serviceability and plug and play components. 24/7 access to your analyzer’s  information helps minimize troubleshooting time with innovative, interchangeable DMC modules in a highly precise, yet tough solution.

Proactive Communications

Maintain optimum performance through iQ360 and email alerts. When subscribed to iQ360 service, your instrument communicates directly to our technical support team upon alarm activation. Our technical support team develops a corrective plan and emails it to your staff. Eliminate surprises and take control of your day with the iQ Series Gas Analyzers.

Personal Device Connectivity

Real time, continuous remote monitoring is now possible with the  iQ companion mobile device app. The iQ app allows for remote monitoring of iQ gas analyzers, simplified ways of getting in touch with us, and instant access to both maintenance alerts and product documentation.

English EN Vietnamese VI